Self-Centering & Shelf Pin Bits
Drilling accurate hinge-screw pilot holes is not an easy task. More often than not the holes are off center and the screws go in crooked. These self-centering bits eliminate this problem. They feature a conical nosepiece that guides the drill to make a perfectly centered piliot hole. If the nosepiece becomes clogged with wood shavings simply loosen the bit casing by hand and the clogged shavings will come out.

The Shelf Pin drill guides work on the same principal as the self-centering bits with a 3/8" nose to fit standard shelf pin jigs and a brad point drill bit for sharp clean cut holes.

All self centering bit guides feature a ΒΌ" hex shank design for ultimate grip and work great in with your Quick Change Chuck.

 

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
19 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.