 |
ABNOX Drum Pumps from type S is suitable for transferring lubricants of medium to high viscosity levels as well as silicon greases and silicon oils. The separate design of suction system and air motor prevents a possible permeation of the medium into the pump head.
Thanks to the constant contact pressure of the follower plate onto the medium the follower plate is brought always to uptate the current fill level.
An empty state detector „container empty“ serves to switch off the pump when the low fill level has been reached, thus preventing the aspiration of air. Replacement of the empty container is quick, clean and convenient, and done with little manual effort. Thanks to complete drainage of the container, a minimum amount of lubricant is wasted. |
|
ABNOX Drum Pump from type S with pressure ratio 10:1 is available with different upgrading options and suitable for all containers 14 kg up to 25 kg available on the market. |
|
|
|
|
Character features of ABNOX - Drum Pumps:
• Modular design
• Long time life product
• Components harmonised perfectly with each other
• For large flow rates. Suitable for centralized supply pump
• Usable also for low temperatures
• No electric connector
• Exchangeable follower plate
• Adjustable pressure at the follower plate
• Exchangeable follower plate
• Automatic shutoff: stop the pump action by low fill level
• Reliability two-hand operation for the UP and DOWN from double cylinder pump lift
Upgrading Options
Upgrading set acoustic warn signal „container empty“ (L) |
|
4630010 |
|
1 piece |
|
Upgrading set low lewer indicator audiable alarm (G) * |
|
4630020 |
|
1 piece |
|
Upgrading set electric refill and low lewer indicator |
|
0001220 |
|
1 piece |
|
Upgrading set 4 guide rollers |
|
4630040 |
|
1 piece |
|
Upgrading set additional air vent for follower plate |
|
0000589 |
|
1 piece |
|
Connection piece 1/4" BSP with gauge 400 bar and ball valve for air vent |
|
4082001 |
|
1 piece |
|
5-Multiplier with fittings 1/4" BSP |
|
4080501 |
|
1 piece |
|
Pressure release with connection piece |
|
4082006 |
|
1 piece |
* only available in combination with upgrading set acoustic warn signal „container empty“ (L), Article No. 4630010
We are happy to calculate the follower plate for you.
To come up with the right size we need the following: |
|
This Air-operated Grease Pump from type S is qualified for delivering silicon greases and silicon oils with a viscosity up to 60'000 cST.
Not suitable for hardening and abrasive media, or with abrasive filling substances! |
|
|
| |
|
| 4603800 - Model AXFP-2-S60, Construction type: 60:1 Type S, Version 14-25 kg |
| Capacity internal dia.(mm) |
260-410 |
| Container height (mm) |
430 |
| Suction tube dia. (mm) |
32 |
| Min./Max temperture |
10/40 |
| Specification for operation medium |
Lubricants up to NLGI 4/1'000'000 m Pa.s |
| Output pressure (medium) at operating pressure 6 bar [bar] |
310 |
| Output pressure (medium) at operating pressure 10 bar [bar] |
516 |
Delivery rate pro double stroke (cm3)
|
6 |
| Delivery rate at pump outlet (cm3/min) |
465 |
Inlet operating pressure (compressed air) optimum [bar]
|
6 |
| Max. air consumption [l/min] |
217 |
| Connection (compressed air) internal thread |
1/4" BSP |
| Connection (Medium) External Thread P |
1/4" BSP |
| |