 |
ABNOX Drum Pumps from type S is suitable for transferring lubricants of medium to high viscosity levels as well as silicon greases.
The separate design of suction system and air motor prevents a possible permeation of the medium into the pump head.
Thanks to the constant contact pressure of the follower plate onto the medium the follower plate is brought always to uptate the current fill level.
An empty state detector „container empty“ serves to switch off the pump when the low fill level has been reached, thus preventing the aspiration of air. Replacement of the empty container is quick, clean and convenient, and done with little manual effort. Thanks to complete drainage of the container, a minimum amount of lubricant is wasted.
ABNOX Drum Pump from type S with pressure ratio 10:1 is available with different upgrading options and suitable for all containers up to 50 kg available on the market.
Character features of ABNOX - Drum Pumps: |
|
• Modular design
• Long life time product
• Components harmonised perfectly with each other
• For large flow rates. Suitable for centralized supply pump
• Usable also for low temperatures
• No electric connector
• Exchangeable follower plate
• Adjustable pressure at the follower plate
• Automatic shutoff: stop the pump action by low fill level
• Reliability two-hand operation for the UP and DOWN from double cylinder pump lift |
|
|
|
|
|
|
| 4605800 - Air-Operated Drum Pump AXFP, Model AXFP3-S25, Construction type: 25:1 Type S, Version up to 50 kg |
| Capacity internal dia.(mm) |
260-410 |
| Container height (mm) |
680 |
| Suction tube dia. (mm) |
32 |
| Min./Max temperture |
10/40 |
| Specification for operation medium |
Lubricants up to NLGI 4/1'000'000 m Pa.s |
| Output pressure (medium) at operating pressure 6 bar [bar] |
140 |
| Output pressure (medium) at operating pressure 10 bar [bar] |
233 |
Delivery rate pro double stroke (cm3)
|
17 |
| Delivery rate at pump outlet (cm3/min) |
1295 |
| Min./Max. inlet stroke (cm3) |
4/10 |
| Inlet operating pressure (compressed air) optimum [bar] |
6 |
| Max. air consumption [l/min] |
217 |
| Connection (compressed air) optimum [bar] |
1/4" BSP |
| Connection (Medium) thread Thread P |
1/4" BSP |
| |
UPGRADING OPTIONS:
| Component parts |
Article No. |
Quantity |
| Upgrading set acoustic container empty signal (L) |
4630010 |
1 piece |
| Upgrading set acoustic refill and empty signal |
4630021 |
1 piece |
| Upgrading set electric refill and empty signal |
0001220 |
1 piece |
| Upgrading set 4 guide rollers/swivel castor (LR) |
4630041 |
1 piece |
| Upgrading set pedestal (SF) |
4630050 |
1 piece |
| Connection piece 1/4" BSP with gauge 400 bar and ball valve for air vent |
4082001 |
1 piece |
| 5-Multipiler with fittings 1/4"BSP |
4080501 |
|
| Pressure release with connection piece |
4082006 |
1 piece |
|
We are happy to calculate the follower plate for you. To come up with the right size we need the following:
—lubrication type
—container height
—internal top-diameter
—internal bottom-diameter |
|
|