DIGITAL READ-OUT LINEAL FOOTAGE ENCODER & PRESET COUNTER

TR3 - Heavy Duty Model

An integrated heavy duty lineal footage encoder and spring loaded measuring wheel assembly all in one, easy-to-use, compact unit. Available in a single, or optional dual-wheel format, the TR3 Heavy Duty Tru-Trac™ is a versatile solution for tracking velocity, position or distance over a wide variety of surfaces in almost any industrial application. Its spring loaded tor-sion arm provides a simple-to-adjust torsion load, allowing the TR3 Heavy Duty Tru-Trac™ to be mounted in any orientation, even upside-down.

Features

  • Heavy Duty Encoder And Measuring Wheel Solution Integrated Into One
  • Industrial Strength Unit
  • Spring Loaded Torsion Arm Makes Wheel Pressure Adjustments Snap
  • Easily Installed In A Vertical, Horizontal, or Upside-Down Orientation
  • Operates Over A Variety Of Surfaces At Speeds Up To 3000 Feet Per Minute
  • Integrated Module Simplifies Your System DeSign, Reducing Cost
  • An integrated heavy duty encoder and spring loaded measuring wheel assembly
  • For use with 7922 Electrical Programmable Preset Counter

 

Product Number

Description

Max Count

Price

TR3

An integrated heavy duty encoder and spring loaded measuring wheel assembly all in one, easy-to-use, compact units

XXXXX Feet

CALL
TR3 Bracket Mounting bracket for TR3 Encoder   CALL
 

7922 - Electronic Programmable Preset Counter

6 digit supertwist LCD programmable preset counter with prescaler, quadrature input and EEPROM data storage in an IP65 DIN case.

This versatile counter with prescaling can be configured for quadrature or uni-directional inputs, dual preset or single preset with batch preset. Reset can be automatic, manual or electronic with a sink (NPN) or source (PNP) input.

The display is a supertwist high visibility backlit LCD which can be viewed from any angle. The count is on the main display and the preset value (or batch preset) is on the lower display.
  • Simple programming via menu driven display
  • Quadrature input
  • High visibility supertwist LCD display can be viewed from any angle
  • Backlight programmable ON, OFF or AUTO
  • 40 years data retention with no power
  • Programmable decimal point up to 3 places
  • Operates from 85-265VAC or 10-26VDC
  • 12VDC output to drive a sensor (when AC powered)
  • Opto-isolated inputs
  • Wide range of prescaling
  • Output relay contacts rated at 5A
  • Output can be set to latch or pulse with programmable pulse duration
  • Environmental protection to IP65
  • Standard DIN housing
  • CE, UL and cUL approved
All programming, reset and presetting can be carried out from the front panel. When powered from an AC supply, there is a 12VDC output to drive a sensor. The key below each digit sets the P1 or P2 (or batch) preset value on the lower display. The red reset key resets the display count to zero or P1 (according to programming). In normal operation the colon illuminates whenever relay 1 is active. In P2 Set mode the colon illuminates whenever relay 2 is active. Click here for specifications.

Product Number

Description

Max Count

Price

7922

6 digit supertwist LCD programmable preset counter with prescaler, quadrature input and EEPROM data storage in an IP65 DIN case

XXXXX Feet

CALL
Instruction Manual
 
To reach a friendly voice, call during our hours of operation: Monday through Friday, 9 a.m. to 6 p.m. EST (Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
19 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2016 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change without notice.