CMT Router Bits

Solid Carbide Spiral Bits
Straight Bits
Slot Cutters
Tongue and Groove Set
Dovetail Bits
Flush trim Bits
Combination Trimmer Bits
Solid Carbide Trimmer Bits
Panel Pilot Bits
Cavetto Edge Mold Bits
Keyhole Bits
Bevel Cutters
Drawer Lock Bits
Weatherseal Bits
Finger Joint & Professional Finger Joint Bits

Bowl Cutters
Bowl and Tray Bits
Round Nose Bits
60° Lettering Bits
60° Laser Point Bits
90° V-Grooving Bits
Rabbeting Bits
Cove Bits
Ovolo Bits
Roundover/Beading Bits
Bull nose Bits
Table Edge and Hand Rail Bits
CMT T-Slot Bits

Ogee Bits

Roman Ogee Bits - Series 840
Classical Ogee Bit - Series 841
Classical Ogee Bit - Series 844
Classical Ogee Bit - Series 845
Ogee Bit with fillet - Series 846
Ogee Bit with fillet - Series 847
Plunge Ogee Bit - Series 848

 Plunge Ogee Bits - Series 848B with bearing
Ogee Bit - Series 859
Ogee Bit - Series 860
Decorative Ogee - Series Bit 865.001
Classical Panel Ogee Bit - Series 865.201B
Classical Ogee Bits - Series 865.301B
OGEE BIT - SERIES 859
These profiles are the mirror image of the traditional roman ogee. They add a sharp defining detail to the edges of cabinets and furniture before rolling into a smooth convex shape.
Shank Size - 1/4"
Item #
Cutting Diameter
Cutting Length

Cutting Radius
inches/mm
Bearing Diameter
Mix and Match for Quantity Pricing
CMT#859.040.11

1-1/8"
1/2"
5/32"
4
1/2"
 CALL
CMT#859.064.11
1-1/2"
3/4"
1/4"
 6.35
1/2"
 CALL
Shank Size - 1/2"
Item #
Cutting Diameter
Cutting Length

Cutting Radius
inches/mm
Bearing Diameter
 Mix_and_Match for Quantity Pricing
CMT#859.540.11

1-1/8"
1/2"
5/32"
4
1/2"
 CALL
CMT#859.564.11
1-1/2"
3/4"
1/4"
 6.35
1/2"
 CALL
Spare Parts:
990.423.00 - 1/2" shield
791.003.00 - 1/2" bearing
990.058.00 - Screw for bearing 1/8W x 3/8"
991.057.00 - 3/32" hex key for 1/8W screws
<img src="../../clearpixel.gif" width="1" height="1" vspace="5" hspace="100">
OGEE BIT - SERIES 860
These tools are identical to the 859 series above, with the addition of an inset bead along the lower edge.
Shank Size - 1/4"
Item #
Cutting Diameter
Cutting Length

Cutting Radius
inches/mm
Bearing Diameter
Mix and Match for Quantity Pricing
CMT#860.040.11

1-1/8"
1/2"
5/32"
4
3/8"
 CALL
CMT#860.064.11
1-1/2"
3/4"
1/4"
 6.35
3/8"
 CALL
Shank Size - 1/2"
Item #
Cutting Diameter
Cutting Length

Cutting Radius
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#860.540.11

1-1/8"
1/2"
5/32"
4
3/8"
 CALL
CMT#860.564.11
1-1/2"
3/4"
1/4"
 6.35
3/8"
 CALL
Spare Parts:
990.422.00 - 3/8" shield
791.002.00 - 3/8" bearing
990.057.00 - Screw for bearing 1/8W x 1/4"
991.057.00 - 3/32" hex key for 1/8W screws
<img src="../../clearpixel.gif" width="1" height="1" vspace="5" hspace="100">
DECORATIVE OGEE BITS - SERIES 865.001
This new CMT ogee bit produces a subtle decorative effect that is perfect for enhancing doors and drawer fronts. Carbide-tipped to ensure a clean, sharp cut.
Shank Size - 1/4"
Item #
Cutting Length
Cutting Radius

Cutting Diameter
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.001.11

7/16"
1/4"
3/4"
19
N/A
 CALL
Shank Size - 1/2"
Item #
Cutting Length
Cutting Radius

Cutting Diameter
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.501.11

7/16"
1/4"
3/4"
19
N/A
 CALL
<img src="../../clearpixel.gif" width="1" height="1" vspace="5" hspace="100">
CLASSICAL PANEL OGEE BITS - SERIES 865.201B with bearing
CMT's new classic panel ogee bit with ball bearing gives you even more decorative possibilities for panel and edge work. The bit design gives you a wide flat bottom cut and the longer shank allows for deeper detailing.
Shank Size - 1/4"
Item #
Cutting Length
Cutting Diameter

Cutting Radius
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.201.11B

31/64"
1/8"
3/4"
19
3/4"
 CALL
Shank Size - 1/2"
Item #
Cutting Length
Cutting Radius

Cutting Radius
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.702.11B

9/16"
5/32"
1-1/8"
28.5
1-1/8"
 CALL
Spare Parts:
791.004.00 - 3/4" bearing
791.027.00 - 1-1/8" bearing
541.001.00 - Stop collars for 1/4" shanks
541.002.00 - Stop collars for 1/2" shanks
991.056.00 - 1.5mm hex key for stop collars
<img src="../../clearpixel.gif" width="1" height="1" vspace="5" hspace="100">
CLASSICAL OGEE BITS - SERIES 865.301B with bearing
CMT's new classic panel ogee bit with ball bearing gives you even more decorative possibilities for panel and edge work. The bit design gives you a wide flat bottom cut and the longer shank allows for deeper detailing.
Shank Size - 1/4"
Item #
Cutting Length
Cutting Diameter

Cutting Radius
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.301.11B

31/64"
1/8"
3/4"
19
3/4"
 CALL
Shank Size - 1/2"
Item #
Cutting Length
Cutting Radius

Cutting Radius
inches/mm
Bearing Diameter
 Mix and Match for Quantity Pricing
CMT#865.802.11B

1/2"
5/32"
1-1/8"
28.5
1-1/8"
 CALL
Spare Parts:
791.004.00 - 3/4" bearing
791.027.00 - 1-1/8" bearing
541.001.00 - Stop collars for 1/4" shanks
541.002.00 - Stop collars for 1/2" shanks
991.056.00 - 1.5mm hex key for stop collars
 

 

To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998 - 2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.