| CMT Router Bits | Back |
Solid Carbide Spiral Bits
Straight Bits
Slot Cutters
Tongue and Groove Set
Dovetail Bits
Flush trim Bits
Combination Trimmer Bits
Solid Carbide Trimmer Bits
Panel Pilot Bits
Cavetto Edge Mold Bits
Keyhole Bits
Bevel Cutters
Drawer Lock Bits
Weatherseal Bits
Finger Joint & Professional Finger Joint Bits | Bowl Cutters
Bowl and Tray Bits
Round Nose Bits
60° Lettering Bits
60° Laser Point Bits
90° V-Grooving Bits
Rabbeting Bits
Cove Bits
Ovolo Bits
Roundover/Beading Bits
Bull nose Bits
TableEdge and Hand Rail Bits
CMT T-Slot Bits | Corner Beading Bits
Decorative Beading Bits
Ogee Bits
Molding Bits
Traditional Bit
Classical Bit
Multiprofile Bits
Lock Miter Bits
Raised Panel Bits
Rail & Stile Bits
V-Tongue & Groove Bits
Finger Pull Bits
Reverse Glue Joint Bits
Window Sill Bits
Window Sash Set |
| |
| Straight Bits If you demand router bits that deliver fast, efficient production along with a beautiful clean edge, then you need CMT Straight Bits in your collection. These razor-sharp, double fluted tools are a perfect example of the features and advantages that define quality CMT products. Our selection of 61 straight bits allows production at an industrial scale on a variety of plywood, composites and natural woods. |  |
| |
| SERIES 811 Straight Bits, short series | SERIES 812 Straight Bits, long series |
| SERIES 811B Pattern Bits, short series | SERIES 812B Pattern Bits, long series |
| SERIES 852-852B Dado & Planer Bits | SERIES 801-801BMortising Bits |
| |
 SERIES 811 Plywood Groove Set | |
 | Our Plywood Groove Bits are designed specifically for routing grooves and dadoes for joints in plywood. That means they match the true thickness of plywood, producing tight, accurate joints. Use our 23/32" bit for 3/4" plywood, 31/64"bit for 1/2" plywood and or 15/64" for 1/4" ply. No gaps or sloppy joints guaranteed. These money-saving 3-bit sets are available with 1/2" or 1/4" shanks. Call today for more information. | |
| Item # | Description | PRICE |
| Shank - 1/4" |
| CMT#811.001.11 | Plywood groove set designed specifically for routing grooves and dadoes for joints in plywood. That means that they match the true thickness of plywood producing tight joints. | CALL |
| Shank - 1/2" |
| CMT#811.501.11 | Plywood groove set designed specifically for routing grooves and dadoes for joints in plywood. That means that they match the true thickness of plywood producing tight joints. | CALL |
 |
| SERIES 811 Straight Bits, short series | |
| Shank 1/4" |
| Item # | Cutting Dia. | Cutting Length Inches | Overall length inches | Use | PRICE |
| Inches | mm |
| CMT#811.020.11 | | 2 | 5/32" | 1-1/2" | | CALL |
| CMT#811.030.11 | | 3 | 1/2" | 2" | | CALL |
| CMT#811.032.11 | 1/8" | 3.2 | 3/4" | 2" | | CALL |
| CMT#811.040.11 | 5/32" | 4 | 1" | 2" | Bit for biscuits | CALL |
| CMT#811.047.11 | 3/16" | 4.75 | 1/2" | 2" | | CALL |
| CMT#811.050.11 | | 5 | 15/32" | 2" | Ply groove bit | CALL |
| CMT#811.060.11 | 15/16" | 6 | 5/8" | 2" | | CALL |
| CMT#811.064.11 | 1/4" | 6.35 | 3/4" | 2-1/4" | | CALL |
| CMT#811.065.11 | 1/4" | 6.35 | 3/4" | 2-3/8" | For Incra Jig | CALL
|
| CMT#811.070.11 | | 7 | 23/32" | 1-7/8" | | CALL
|
| CMT#811.080.11 | | 8 | 3/4" | 2" | | CALL |
| CMT#811.081.11 | | 8 | 1" | 2-13/16 | For Leigh Jig | CALL |
| CMT#811.095.11 | | 9.5 | 3/4" | 2" | | CALL |
| CMT#811.096.11 | | 9.5 | 1" | 2-1/2" | For Incra Jig | CALL |
| CMT#811.100.11 | ----- | 10 | 3/4" | 1-7/8" | | CALL |
| CMT#811.120.11 | ----- | 12 | 3/4" | 2" | | CALL |
| CMT#811.123.11 | | 12.3 | 1" | 2-1/4" | Ply groove | CALL |
| CMT#811.127.11 | | 12.7 | 3/4" | | | CALL |
| CMT#811.140.11 | 3/4 | 14 | 2" | 2-1/4" | | CALL |
| CMT#811.142.11 | 9/16 | 14.2 | 9/16" | 2-1/4" | | CALL |
| CMT#811.150.11 | ----- | 15 | 3/4" | 2-1/4" | | CALL |
| CMT#811.158.11 | | 15.8 | 3/4" | 2-5/8" | | CALL |
| CMT#811.160.11 | ----- | 16 | 3/4" | 2-1/4" | | CALL |
| CMT#811.180.11 | ----- | 18 | 3/4" | 2" | | CALL |
| CMT#811.182.11 | | 18.2 | 1" | 2-1/4" | Ply groove | CALL |
| CMT#811.191.11 | | 19 | 3/4" | 2-1/4" | | CALL |
| CMT#811.200.11 | ----- | 20 | 3/4" | 2" | | CALL |
| CMT#811.220.11 | ----- | 22 | 3/4" | 2-1/4" | | CALL |
| CMT#811.254.11 | | 25.4 | 3/4" | 2" | | CALL |
| Shank 1/2" |
| CMT#811.560.11 | 15/16" | 6 | 1" | 3" | Ply groove | CALL |
| CMT#811.564.11 | 1/4" | 6.35 | 1-1/4" | 3" | For Incra Jig | CALL |
| CMT#811.595.11 | 3/8" | 9.5 | 1-1/4" | 3" | For Incra Jig | CALL |
| CMT#811.600.11 | ----- | 10 | 1-1/2" | 3-1/2" | | CALL |
| CMT#811.620.11 | ----- | 12 | 2" | 4" | | CALL |
| CMT#811.623.11 | 31/64" | 12.3 | 1" | 2-1/2" | Ply groove | CALL |
| CMT#811.627.11 | 1/2" | 12.7 | 1" | 2-5/8" | | CALL |
| CMT#811.628.11 | 1/2" | 12.7 | 1" | 3-1/4" | For Leigh Jig | CALL |
| CMT#811.660.11 | 5/8" | 15.8 | 1" | 2-1/2" | | CALL |
| CMT#811.661.11 | ----- | 16 | 1" | 2-1/2" | | CALL |
| CMT#811.682.11 | 23/32" | 18.2 | 1" | 2-1/2" | Ply groove | CALL |
| CMT#811.690.11 | 3/4" | 19 | 1" | 2-1/2" | | CALL |
| CMT#811.754.11 | 1" | 25.4 | 1-1/4" | 3" | | CALL |
|
| SERIES 811B - Pattern Bits, short series | |
| Many complicated template jobs that are usually done with a band-saw or a scrollsaw can be just as easily and efficiently carried out with a CMT top bearing Pattern Bit. To avoid unnecessary damage to the template or the bit, make sure to set the cutter lower than the template. | 
Click on image to see a larger version. |
| Item # | Cutting Dia. | Cutting Length inches | Overall length inches | Bearing Dia. inches | PRICE |
| Inches | mm |
Shank 1/4"
**Note: on these two bits the cut is offset to the bearing - click here to see illustration. |
| CMT#811.081.11B** | 5/16" | 8 | 1" | 2-13/16 | 1/2" | CALL |
| CMT#811.027.11B** | 1/2" | 12.7 | 3/4" | 2-1/4" | 1/2" | CALL |
| CMT#811.142.11B | 9/16" | 14.2 | 9/16" | 2-1/4" | 5/8" | CALL |
| CMT#811.159.11B | 5/8" | 15.8 | 1/2" | 2-9/32" | 5/8" | CALL |
| CMT#811.158.11B | 5/8" | 15.8 | 3/4" | 2-5/8" | 5/8" | CALL |
| CMT#811.191.11B | 3/4" | 19 | 3/4" | 2-1/4" | 3/4" | CALL |
| Shank 1/2" |
| CMT#811.690.11B | 3/4" | 19 | 1" | 2-1/2" | 3/4" | CALL |
| CMT#811.222.11B* | 3/4" | 22.2 | 1" | 2-5/8" | 7/8" | CALL |
| *3/8" shank with bushings 01/2" |
Click here for SAFE ROUTING 101