| CMT Router Bits | Back | |||||
| Solid Carbide Spiral Bits Straight Bits Slot Cutters Tongue and Groove Set Dovetail Bits Flush trim Bits Combination Trimmer Bits Solid Carbide Trimmer Bits Panel Pilot Bits Cavetto Edge Mold Bits Keyhole Bits Bevel Cutters Drawer Lock Bits Weatherseal Bits Finger Joint & Professional Finger Joint Bits | Bowl Cutters Bowl and Tray Bits Round Nose Bits 60° Lettering Bits 60° Laser Point Bits 90° V-Grooving Bits Rabbeting Bits Cove Bits Ovolo Bits Roundover/Beading Bits Bull nose Bits Table Edge and Hand Rail Bits CMT T-Slot Bits | Corner Beading Bits Decorative Beading Bits Ogee Bits Molding Bits Traditional Bit Classical Bit Multiprofile Bits Lock Miter Bits Raised Panel Bits Rail & Stile Bits V-Tongue & Groove Bits Finger Pull Bits Reverse Glue Joint Bits Window Sill Bits Window Sash Set |
||||
| SERIES 811 Straight Bits, short series | SERIES 812 Straight Bits, long series | |||||
| SERIES 811B Pattern Bits, short series | SERIES 812B Pattern Bits, long series | |||||
| SERIES 852-852B Dado & Planer Bits | SERIES 801-801B Mortising Bits | |||||
 SERIES 852-852B Dado & Planer Bits | ||||||
| CMT Dado and Planer bits are perfect for polishing dados or smoothing rough stock. Made of super strong steel with thick carbide tips, these bits work well for any task. Use them to strip paint and varnish. Available with ball bearing guide for easy pattern work. |  |
|||||
| Item # | Cutting Dia. | Cutting Length Inches | Bearing Dia. Inches | PRICE |
||
| Inches | mm | |||||
| Shank 1/4" | ||||||
CMT#852.001.11 | 3/4" | 19 | 3/8" | ----- | CALL |
|
| Shank 1/4" with top bearing | ||||||
CMT#852.001.11B | 3/4" | 19 | 3/8" | 3/4" | CALL |
|
 Shank 1/2" | ||||||
CMT#852.501.11 | 3/4" | 19 | 3/8" | ----- | CALL |
|
CMT#852.502.11 | 1 | 25.4 | 3/8" | ----- | CALL |
|
| CMT#852.503.11 | 7/16" | 11.1 | 1-1/4" | ----- | CALL |
|
CMT#852.504.11 | ----- | 12 | 1-1/4" | ----- |
CALL |
|
| Shank 1/2" with top bearing | ||||||
CMT#852.501.11B | 3/4" | 19 | 3/8" | 3/4" |
CALL |
|
CMT#852.503.11B | 1-1/4" | 31.7 | 5/8" | 1-1/4" |
CALL |
|
CMT#852.504.11TB | 1-1/2" | 38.1 | 5/8" | 1-1/2" |
CALL |
|
| Spare Parts: | ||||||
| 791.004.00 - 3/4" bearing with 1/4" inner diameter | ||||||
| 791.011.00 - 3/4" bearing with 1/2" inner diameter | ||||||
| 791.015.00 - 1-1/4" bearing | ||||||
| 791.020.00 - 1-1/4" bearing | ||||||
| 541.001.00 - Stop collar for 1/4" shanks | ||||||
| 541.002.00 - Stop collar for 1/2" shanks | ||||||
| 991.056.00 - 1.5mm hex key for stop collars | ||||||
| ||||||
| SERIES 801-801B Mortising Bits | ||||||
| Constructed with thick carbide tips and downward shear angle design, CMT Mortising Bits give you flawless performance. The negative shear angle of the cutting edges pushes the wood fibers down as they cut, allowing you to rout perfect hinge mortises with no splintered edges or rough bottoms. They also make an easy job of piece work in both natural wood and wood composites. We offer bits to fit most popular mortising jigs. |  Click on image to see a larger version. |
|||||
| Item # | Cutting Dia. | Cutting Length | PRICE |
|||
| Inches | mm | |||||
| SERIES 801 - Shank 1/4" | ||||||
| CMT#801.128.11 | 1/2" | 12.7 | 5/16" |
CALL |
||
| CMT#801.127.11 | 1/2" | 12.7 | 3/4" |
CALL |
||
| CMT#801.158.11 | 5/8" | 15.8 | 3/4" |
CALL |
||
| CMT#801.190.11 | 3/4" | 19 | 3/4" |
CALL |
||
| CMT#801.317.11 | 1-1/4" | 31.7 | 1/2" |
CALL |
||
| SERIES 801 - Shank 1/2" | ||||||
| CMT#801.627.11 | 1/2" | 12.7 | 3/4" |
CALL |
||
| CMT#801.690.11 | 3/4" | 19 | 3/4" |
CALL |
||
| CMT#801.818.11 | 1-1/4" | 31.7 | 15/64" |
CALL |
||
| CMT#801.817.11 | 1-1/4" | 31.7 | 1/2" |
CALL |
||
| SERIES 801B - Shank 1/4" with top bearing | ||||||
CMT#801.127.11B | 1/2" | 12.7 | 3/4"-1/2" dia. bearing |
CALL |
||
| CMT#801.158.11B | 5/8" | 15.8 | 3/4"-5/8" dia. bearing | CALL |
||
| CMT#801.190.11B | 3/4" | 19 | 3/4"-3/4" dia. bearing | CALL |
||
| SERIES 801B - Shank 1/2" with bearing | ||||||
| CMT#801.818.11B | 1-1/4" | 31.7 | 15/64" - 1-1/4" dia. bearing | CALL |
||
| CMT#801.817.11B | 1-1/4" | 31.7 | 1/2" - 1-1/4" dia. bearing | CALL |
||
| Spare Parts | ||||||
| 791.010.00 - 1/2" bearing | ||||||
| 791.009.00 - 5/8" bearing | ||||||
| 791.004.00 - 3/4" bearing | ||||||
| 791.015.00 - 1-1/4" bearing | ||||||
| 541.001.00 - stop collar for 1/4" shanks | ||||||
| 541.002.00 - stop collar for 1/2" shanks | ||||||
| 991.056.00 - stop collar for 1/4" shanks | ||||||
|
||||||
Click here for SAFE ROUTING 101